Place of Origin:
Xi'an,China
Brand Name:
FHH
Silver Titanium Profile - Unmatched Strength and Reliability
Titanium or titanium alloy angle possess many remarkable features. This is mainly expressed in the following aspects:
1. High Strength: Titanium alloy has a high strength capacity, its tensile capability ranges from 686-1176mpa, while its density is only about 60% of steel, thus the specific strength is very high.
2. High Hardness: The hardness value (annealed) of titanium alloy is from 32-38 HRC.
3. Low Elastic Modulus: The elastic modulus of titanium alloy (annealed) is approximately 1.078×10-1.176×10 MPa, which is roughly half that of steel and stainless steel.
4. Outstanding High and Low Temperature Performance: At relatively high temperature, titanium alloy can hold its own with respect to its mechanical efficacy, its heat resistance runs rings around aluminum alloy, and its operating temperature range broadens from current new heat-resistant titanium alloy operating temperature to 550-600 ℃. At low temperature, the strength of titanium alloy significantly increases compared to room temperature, while its toughness holds up indeed, and low temperature titanium alloy can maintain good toughness even at -253 ℃.
5. Strong Corrosion Resistance: Titanium exhibits strong corrosion resistance when it is enclosed in the air below 550 ° C, as thin and dense titanium oxide film fastly forms on its surface. Therefore, it far outclasses most stainless steel in terms of corrosion resistance when facing the atmosphere, seawater, nitric and sulfuric acid and other oxidizing media and strong alkali.
Titanium or titanium alloy angle have many excellent characteristics, titanium alloy processing materials are mainly reflected in the following aspects:
1. High strength. Titanium alloy has a high strength, its tensile strength is 686-1176mpa, and the density is only about 60% of steel, so the specific strength is very high.
2. High hardness. The hardness HRC of titanium alloy (annealed) is 32-38.
3. Low elastic modulus. The elastic modulus of titanium alloy (annealed) is 1.078×10-1.176×10MPa, which is about half that of steel and stainless steel.
4. Excellent high and low temperature performance. At high temperature, titanium alloy can still maintain good mechanical properties, its heat resistance is much higher than aluminum alloy, and the operating temperature range is wide, the current new heat-resistant titanium alloy operating temperature can reach 550-600 ℃; At low temperature, the strength of titanium alloy is increased compared with that at room temperature, and it has good toughness, and low temperature titanium alloy can maintain good toughness at -253℃.
5. Titanium angle has strong corrosion resistance. Titanium in the air below 550 ° C, the surface will quickly form a thin and dense titanium oxide film, so in the atmosphere, seawater, nitric and sulfuric acid and other oxidizing media and strong alkali, its corrosion resistance is better than most stainless steel.
| No. | Products | Dimension(mm) | Length(mm) | About Kgs per piece | remark |
| 1 | 3# angle | 30X30X3 | L=6000 | 4.73 | Equal sides |
| 2 | 3# angle | 30X30X4 | L=6000 | 6.15 | Equal sides |
| 3 | 4# angle | 40X40X3 | L=6000 | 6.38 | Equal sides |
| 4 | 4# angle | 40X40X4 | L=6000 | 8.34 | Equal sides |
| 5 | 5# angle | 50X50X3 | L=6000 | 8.03 | Equal sides |
| 6 | 5# angle | 50X50X4 | L=6000 | 10.54 | Equal sides |
| 7 | 6.3# angle | 63X63X4 | L=6000 | 13.46 | Equal sides |
| 8 | 6.3# angle | 63X63X5 | L=6000 | 16.62 | Equal sides |
| 9 | 8# angle | 80X80X5 | L=6000 | 21.41 | Equal sides |
| 10 | 8# angle | 80X80X6 | L=6000 | 25.42 | Equal sides |
| materials | Gr1,Gr2,Gr3,Gr4,gr5......etc | ||||
| Standards: |
GB/T706-2016,GB/T37520-2019,GB/T41750-2022,N/HL 001-2021,N/HL 002-2021,ASTM F67,AMS4928,ASTM F136,ASTM B348,BT1-0,TP270,TP550,TP450 etc.
|
||||
FHH titanium angle is a product with superior quality and craftsmanship. The brand name FHH comes from Xi'an, China, and it is one of the most trusted and well-known manufacturers of titanium profiles in the world. Its minimum order quantity is 200kgs, and its packaging is designed for seaworth shipment materials, which can guarantee a safe and secure delivery. The delivery time is 5-8 days, and payment can be made via L/C, D/P, and T/T. With a supply capacity of 70mt per month, FHH titanium angle is produced through a cold bend technique in accordance with ASTM F67, AMS4928, ASTM F136, ASTM B348,BT1-0, TP270, TP550, TP450 Etc., and it comes in silver color with widths ranging from 3mm to 10mm. As one of the leading titanium profiles manufacturers and titanium angle suppliers, FHH titanium angle is a high-performance product with excellent quality, adaptability, and durability.
Titanium Angle provides technical support and services to help customers get the most out of their products and solutions. Our technical support team is available 24/7 to answer any questions you may have about our products and services. We provide a comprehensive range of services including troubleshooting, installation, maintenance, and customization. Our services are tailored to meet the individual needs of our customers and to ensure their satisfaction.
We offer a wide range of support options to help you get the most out of your Titanium Angle products and solutions. We provide online support, phone support, and onsite support. Our online resources include a knowledge base, tutorials, and FAQs. We also have an active community forum where you can ask questions and get answers from our experienced team of experts.
Our technical support team is committed to helping our customers get the most out of their products and solutions. We strive to provide the highest level of customer service and satisfaction. If you have any questions, please do not hesitate to contact us.
Send your inquiry directly to us
